Function Introduction:

The cell induction soldering head is used to interconnect and solder the bus ribbon at the head, middle and tail of the outgoing line type assembly; it has the function of coil bus ribbon feeding belt and bending U-and L-type leads upward. Higher speed; compatible with larger size modules.

Characteristics:

• Cycle time 17s, high speed.
• Strong compatible with Multi-shard of 6 strings, 5 strings single bypass soldering and 6 strings double bypass soldering.
• Corrects twice to the position of the 10/12 series half piece cell string, grabs the cell string by vacuum adsorption, one time empty soldering and high welding accuracy.
• Convenient specification conversion
• Can punch at the end of the bus ribbon
• Single side feedback,easy to operate
• Double bypass soldering integration can meet the customer’s demand for 6 strings double bypass soldering of bypass bus ribbon, can be closed or opened according to the actual use demand.
• The smallest floor area, the lowest Co0.

Specification:

1. Cycle time : 17sec/panel(single bypass soldering) 21 sec/panel(opening Double bypass soldering)
2. Activation:98%;
3. Cell Specification:166mm-230mm;
4. Panel specification: A 156-180 Cell; 6 strings X 10half pieces X2;6 strings X11 half pieces X2; 6 strings X 12 half pieces
   x2; 6 strings X 13 half pieces X 21 B,182 Cell; 6 strings X9 pieces X2: C210 Cell 6 strings X 10 half pieces X2; 6 strings X 15 one third pieces X2 D210 cell 5 strings X10 half pieces X2 : 5 strings X 15 one third pieces X2
5. Cell space: -0.5-4mm;
6. String space: 1-6mm; bypass soldering of string space :>10mm;
7. Glass specification: width(980-1500)X length (1720-2600mm);
8. Correction accuracy of cell string:<+025mm;
9. Equipment power supply : three-phase 380V 50/60Hz;
10. Power:Peak 35kw;; average 25kw;
11. Air: positive pressure 0.6~0.8MPa, negtive pressure about-70kPa;
12. Equipment size: length X width X height:6580 X 5604 X 2621mm(including two assembly lines)